This product is currently out of stock
You can place a return request within 10 days of order delivery.
In case of damaged/missing product or empty parcel, the return request should be filed within 2 days of delivery.Know More
new delhi , DelhiVisit Seller Store
CRIMPING TOOL FOR RJ45 CONNECTOR FOR LAN / WAN / NETWORKING / ETHERNET / UTP CABLE / CAT-5 CABLE
The Best Crimping tool available. Your Satisfaction is guaranteed.
Almost all modern NICs, hubs and routers use a type of connector called "RJ45" This is an 8-pin plastic connector that looks like a large version of a telephone connector. To put these connectors on the cable, you will have RJ45 crimping tool. The tool is necessary because it not only clamps the connector onto the cable, but also pushes the teeth of the connector into the individual wires of the cable. Do NOT attempt to apply these connectors without the proper crimping tool.
Step 4: Crimping the connector. : Insert the RJ45 connector into the crimping tool with the connectors clip fitting into the guide built into the crimper. The gold teeth of the connector should be facing the teeth on the crimper. Make sure the connector is pushed all the way into the crimper until it cannot go any farther. This ensures the teeth of the crimper are properly aligned with the teeth of the connector. Close the handles of the crimper firmly together. Test the connection by gently tugging on the cable to ensure it does not come out of the connector.
100% ORIGINAL, GUARANTEED QUALITY
RJ 45 Crimping Tool
VERY TOUGH BLADES
A Must For Every Computer Engineer, CABLE INTERNET ENGINEERS, Networking Engineer, Hardware Engineering Students etc
0 Ratings, 0 Reviews
Have you used this product?
Rate it now.