Hospeco ProWorks GL-V103PX Industrial Grade Vinyl Glove, Powdered, Disposable, 9" Length, 3 mil Thickness, X-Large (Pack

The Hospeco ProWorks GL-V103P vinyl, powdered, industrial disposable glove has a smooth surface on the palm and fingers for tactile sensitivity. It meets Food and Drug Administration (FDA) regulations for food contact (21CFR, 170 199). The glove has a palm thickness of 3 mils and a finger thickness of 3 mils and is 9" long from the tip of the middle finger to the edge of the beaded wrist cuff. Vinyl is suitable for applications requiring frequent changing and reduces the likelihood of allergic reaction, but is not suitable for use in wet environments or when exposed to abrasion, chemicals, and high temperatures. Cornstarch on the inside of this powdered glove makes it easier to put on and take off than a powder-free glove. This ambidextrous clear glove is suitable for aviation, janitorial, and education applications.SpecificationsMaterialVinyl, powderedPalm thickness3 milsFinger thickness3 milsLength9"ColorClearMinimum tensile strength11 megapascals (MPa) before and after agingElongation before aging300%Elongation after aging300%Acceptable Quality Level (AQL)4.0Tensile strength, measured in MPa, is the amount of force required to rip a glove; the higher the number, the stronger the glove material. Elongation measures how much a glove can be stretched before it breaks. It is expressed as a percent of the original length of the glove at the moment of breakage; the higher the percent, the more the glove can stretch. AQL is an FDA quality specification for the defect rate in surgical and exam gloves. The FDA requires an AQL of 1.5 for surgical gloves and 2.5 for exam gloves.Disposable and limited-use gloves are used in medical, forensic, scientific, food service, and industrial applications. Disposable gloves are commonly made from flexible materials such as latex, nitrile, chloroprene, and vinyl. While most disposable gloves are designed for use on either hand, some can be purchased in hand-specific models.