2Ch DC 12V Wireless Remote Switch Learning With Very Long Range 2Pc. Transmitters

 Receiver:

Specifications

o   Operating Voltage: DC12V

o   Control Voltage : 2Ch*Any(AC/DC)1-300V,With NO/NC Contacts

o   Maximum Load:  Continuous,Non Inductive Load 500w, Inductive Load (100w Max.)

    o   Heavy Inductive Load Such As Motors Is Not Recommended for 10a           receivers.  pls. use only 30a receivers

     o   Operating Frequency: 315  Mhz                  

     o   Encoding Type: Learning Code

NOTE :Receiver box color may be black or off white color(availability varies from time to time ). If U  have special choice, pls. do confirm before placing the order.

Learning Procedure For 10a Receiver

1-Erasing Of Memory Of Receiver Unit: 

Press Hold The Learning Button On Receiver Unit.It will glow ,keep it pressed For Long Time Until The LED Indicator OF Receiver glows off   . Erasing Can Be Confirmed By Checking The Sound On Working Of Relays On Receiver. Press Any Button From The Transmitter, There Should Be No Working On Relays On Receiver Unit, Means No Sound Will Come For The Relays On Receiver…………Means Erasing Is Complete.

2-Mode Selection : Is Of 2 types

•        A-Bell Push Type(JOG/Momentary)

•        B-Normal On Off Switch Type(Toggle)

A—For Bell Push Type : (Jogging)-After Completing The First Step , Press Hold Learning Button , Until The LED On Receiver Flashes Only Once  , Immediately Release The Learning Button.

B-For -Normal On Off Switch Type 

                            :-After Completing The First Step , Press Hold Learning Button , Until The Led On Receiver Flashes Continuously Thrice  , Immediately Release The Learning Button.

3—Pairing Of Transmitter  With Receiver :

After The 2nd Step Is Over, Again Press Hold The Learning Button. When The Led Indicator Glows, Immediately Release The Learning Button Of Receiver And Make Push Of Any Button On Transmitter. Wait Until The Led On Receiver Flashes Thrice And Stop.                         

  These 3 Successive Steps Complete The Learning Procedure