Anti Collision Rear-end Car Laser Tail Fog Light Auto Brake Parking Lamp light

SAME DAY SHIPPING IF ORDERS PLACED BEFORE 3 PM OR ORDERS PLACED AFTER 3 PM WILL BE SHIPPED NEXT DAY.

AND WE WILL BE SENDING A FREE COMPLIMENTARY SAMPLE GIFT WITH MANUAL ALONG WITH THIS ORDER THE PRODUCT WILL BE ONE OF ANY FROM OUR STORE.

Features: 

·         It can be more effectively to warn the behind vehicle to avoid traffic accident with too close distance when driving in the rain, fog and sandstorm weather.

·         It also provide more eye catching position warning of the vehicle and steering indication when driving at night .

·         What's more ,the automobile laser fog light also is beneficial for the novice to make Para auxiliary line when they driving back into the garage.

·         Water temperature protection, Anti-reverse protection dust.

·         Life: 10000 hours (Hours counted of driving whenever you are driving that hours are counted )

·         * » Length: 0.98" (2.5cm) 
* » Diameter: 0.71" (1.8cm) 
* Color: Black Housing 
* Light Color: Red 
* Wire Length: 31.10" (79cm) 
* Laser Wavelength: 650nm 
* Laser Power: 200mW 
* Operating Temperature: -20℃ to 70 ℃. 
* Wattage: 5W 
* Operating Voltage: 12V-24V 
* Adjustable Angle: 90 degree 
* IP: IPX4 
* Weight: 45g 
* 2 wires connection system.(Black is for Negative, Red is for Positive)

Warning:

·         Do not illuminate the eye when installed

·         Do not shield the plate when installed

·         The product is only used for cars, trucks or motorcycles with voltage of 12V-24V

How to Install it?

·         Connect the wire with the Reverse Light/ Parking Light/ Brake Light/ Plate Lamp Wire.

·         Use the 3M Sticker(Inside the package) to fix the laser light ,you can decide which part would you like to  choose.

·         Adjust the angle ,it can be adjusted 180 degree

Package contents:

          1 * Car laser fog lamp
      * 1x Mounting Bracket and Set of Mounting Thread with 3M Adhesive Tape
      * Several Screws

·         Fitment:

·         * Applicable to Most Auto Car Vehicle Automobile.

·         * Please Read All Description and Fitment Before Ordering the Product.

·         Installation: 
* Connect to license plate light line ( Recommend ), you can connect to the brake light line, rear fog light line,and warning light line as well. 
* Stick the 3M above the middle of the license plate 
* Use the screw to fix the light, and adjust the suitable angle to get the safe distance you want.

·         * Modification may required for some models. 
* Note: Professionals install is strongly recommended to avoid trouble caused by inexperienced installer!  We suggest go to your service centre or professional car mechanic.