Product Sold Out
Inclusive of all taxes
English हिंदी
Original Price |
|
Deal Price | ||
---|---|---|---|---|
₹600 |
|
₹588 |
*All discounts can be availed in the cart page
This product is currently out of stock
If applicable customer can place a return/replacement request within 10 Days of order delivery.
In case of damaged/missing/wrong product or empty parcel, the return/replacement request should be placed within 2 days of delivery.
Know More1 leads to 6 feet: EN / VCC / GND / RXD / TXD / STATE (Bluetooth status leads to the foot, is not connected to the output low, after connecting output high) 2 with the connection status indicator, LED flash means no Bluetooth connection; LED flashing slowly that enter the AT command mode 3 onboard 3.3V regulator chip, the input voltage DC 3.6V-6V; When unpaired, current of about 30mA (because LED lights flashing, the current state of change); After successful pairing, the current is about 10mA 4 Interface level 3.3V, you can directly connect a variety of microcontroller (/51/AVR/PIC/ARM/MSP430 etc.), 5V microcontroller can also be directly connected. Directly connected to the microcontroller serial port, not through the MAX232 chip! 5 open area effective transmission distance of 10 meters, over 10 meters are possible, but do not guarantee the quality of the connection 6. After successful pairing, can be used as a full-duplex serial port. Do not need to know anything about the Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format. This is the most common communication format that does not support other formats! 7 Press the key to give the Bluetooth module is energized to enter AT mode, set parameters and query information 8 Switch between master and slave mode via AT commands 9 Default baud rate is 9600, Default passkey is 1234, Default name HC-05 10 Module is protected with transparent shrink tube WIRING PINOUT: VCC: positive power supply GND: power supply is negative RXD: Receive side, the Bluetooth module receives data sent to the other device; TXD terminal normally connected to the other device to send TXD: sending end, the Bluetooth module to send data to other devices; RXD terminal normally connected to other devices receiving EN: Enable, then you need to enter AT mode 3.3V
Physical Specifications | |
Material | : Plastic |
Colour | : Multi-Colour |
Type Specification | |
Type | : Science Project Kits |
General Specifications | |
Country Of Origin | : India |
Ideal For | : Unisex |
Skills | : Creativity & Imagination |
Age | : 13 Years & Above |
Technical Specifications | |
Assembly Required | : No |
Remote Controlled | : Yes |
Battery Required | : Yes |
More Details |
|
Maximum Retail Price (inclusive of all taxes) | Rs.899 |
Common or Generic Name | - |
Net Contents / Net Quantity | - |
Manufacturer's Name and Address | - |
Packer's Name and Address | - |
Marketer's name and Address | - |
Importer's Name and Address | - |
Country of Origin / Manufacture / Assembly | India |
Disclaimer | Buyers are advised to check BIS Standard Mark (ISI Mark) on the products wherein such certification is mandatory. For more information please check the list of products under compulsory certification by the Bureau of Indian Standards at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-i-mark-scheme/ |