EJA Art Traditional Silver 3D Mirror Finish Acrylic Sticker

This is DIY productaccording renderings (or your own ideas) paste in your favorite place. Package Include: 1 x mirror sticker Our decal stickers are made from the best acrylic in the industry. They can last for many years without peeling or fading. Our decal stickers are no harm to the environment and health. Installation prompt: 1. Please keep the wall clean before pasting. 2.First according to the template on the ground put the product well. 3.Suggest to take a small piece of component test whether suitable for metope. 4.This product can be used again and again please use another binding to cooperate when you use again. 5. Press firmly to squeeze out any air bubbles. Don't: Ash surface Broken surfaceuneven surface Do:Clean smooth walltileswindowssmooth wallpaperclosetsplastic
These wall stickers decorate your home just in minutes. Easy installation. The surface you wish to attach your decal must be clean and free from dust, grease or any other contamination. Simply peel those pre-cut pieces of wall stickers off from the backing paper and apply them to the desired area. Refer to the finished design shown in between the sheet and follow the numbers mentioned on the pieces to form the desired pattern. Freshly painted or lacquered surfaces must be allowed to completely cure for minimum 30 days before the decal is applied. After pasting the wall stickers on your wall, press firmly along the border and remove air bubbles if any. Repeat, if required. Do not apply on wet walls. It will be helpful and fun if you take help of your friends or family members. Ideal for family lounge, hall, bedroom, cafe and restaurant, kids room, nursery room etc.

Make sure the wall surface is smooth, free of moisture, dust and dirt.   Gently and carefully peel out the pre-cut pieces.    Follow the numbers mentioned on the pre-cut pieces and join them to form the pattern.
Press firmly along the border of the wall stickers to ensure no loose edges.				Voila! You did it.

If you notice any air bubbles, you can use a pin or needle to prick and squeeze out the air.

 

Voila! You did it.