meSleep Nature Hard Drive Skin Skin

meSleep Hard Drive Skin Skins made of super-durable 3M vinyl feature patented air release technology for a smooth, zero-bubble surface that protects your device from dirt, minor scratches & dullness, increasing its life & re-sale value without adding bulk. This skin is for both front and back surface of your Hard Drive Skin and is compatible with almost all Hard Drive Skins. Dimensions (W x H): 3.5 inches x 5 inches Compatibility: Most laptops with screen sizes ranging from 10" to 15.6" Instructions for application: 1. Make sure your Hard Drive Skin is clean. Wipe it off with a soft cloth. The Hard Drive Skin should be free of dust, fat or grease - otherwise the Hard Drive Skin skin may not stick to your Hard Drive Skin as well as it's supposed to. 2. Take the measurement of the applying area 3. Trim the exact size before applying with a blade/scissors 4. Align the Hard Drive Skin skin on your Hard Drive Skin, take care that you put it on straight and in the exact position that you want to place it 5. Remove only one side of the liner from sheet, align to the applying surface and start attaching them slowly 6. Proceed carefully with the use of a clean cloth and/or a plastic card (i.e. ATM card) to assure no air bubbles remain until the liner is removed