Oren Empower Very Sweet Decorative Pink Flower Wall Sticker (88 cm X cm 150, Multicolor)

The most exciting and unique point of our wall decals are that these are really easy to use. You can simply peel it off and place it on a smooth surface. The surface of wall glass door or any space where you wish to apply stickers must be clean and free from dust grease or any contamination. The sticker can be remove and reuse or reposition minimum up to 3 to 4 times. Wall decals prices are very low and affordable so you can even change the look and d?cor home often as an when you like. Don?t apply on freshly painted or lacquered surface. Wait minimum 2-3 weeks for the surface to completely cure. Avoid installation of sticker on certain surfaces such as brick stucco concrete block suede paints and sand paints. Do not apply on wet walls. After applying press firmly to squeeze out any air bubbles for better result. The entire Decor collection of Oren Empowerment is definitely one of the most varied collections available in the market.These wall stickers decorate your home just in minutes. Easy installation. The surface you wish to attach your decal must be clean and free from dust, grease or any other contamination. Simply peel those pre-cut pieces of wall stickers off from the backing paper and apply them to the desired area. Refer to the finished design shown in between the sheet and follow the numbers mentioned on the pieces to form the desired pattern. Freshly painted or lacquered surfaces must be allowed to completely cure for minimum 30 days before the decal is applied. After pasting the wall stickers on your wall, press firmly along the border and remove air bubbles if any. Repeat, if required. Do not apply on wet walls. It will be helpful and fun if you take help of your friends or family members. Ideal for family lounge, hall, bedroom, cafe and restaurant, kids room, nursery room etc.

Make sure the wall surface is smooth, free of moisture, dust and dirt.   Gently and carefully peel out the pre-cut pieces.    Follow the numbers mentioned on the pre-cut pieces and join them to form the pattern.
Press firmly along the border of the wall stickers to ensure no loose edges.				Voila! You did it.

If you notice any air bubbles, you can use a pin or needle to prick and squeeze out the air.

 

Voila! You did it.