PIR Detector Infrared Motion Sensor Switch 25mm, AC220V, Imported From USA

Brand Name:TCAM,
Certification:CCC,
Warranty:1 Year,
Switch Type:Sensor Switch,
Features:PIR Detector Infrared Motion Sensor,
Material:Copper & ABS,
Item Type:Switches

Product Description:
100% Brand New and High Quality
Easy to Install and Simple to Use
Adjust the light soft and stable, no flickering,
You can conveniently to let the light auto on/off .
The switch can detect human body\'s infrared ,
and use infrared to control the load
Users according to actual needs,
Human body sensors installed in the appropriate environment
Applications: Incandescent lamp, energy-saving lamps, LED lamp, fluorescent lamp and other kinds of loads
Technical Specifications:
Type: PIR Switch
Color: White
Working Voltage/Frequency: AC100-240V, 50/60Hz
Output power: ≥40W
Photosensing Setting: ≥3Lux
Sensing Distance: 4-6m
Time Delay: 40secs
Angle Coverage: 110°
Extreme Temperature Using: -10℃ To 45℃
Standby power consumption: <0.1W
Size: 35mmx25mm
Quantity: 1 Pcs=1 Set
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
 
Package Contents:
1 Set x Automatic Infrared PIR Motion Sensor Switch
 
Features:
1.Adaptive to filament, electricity saving lamp
2.This lamp is internal equipped with auto body sensor.If poeple come.the lam will power on, if people leave, the lamp will power off
3.Inner body auto sensor adopts infrared heat releasing device,and it can accurately capture moving low frequency signal and automatically power on
4.When people leave,the lamp will auto delay power off,convenient and energy saving
5.Inner side of the lap is set up with auto ambient brightness detecting circuit. Only when ambient brightness is lower than setting value,the sensor will receive sense and let the lamp power off.And it is energy saving
 
Notice:
1.When installing,please disconnect the power to guarantee safety
2.Don't apply it to overpower current or voltage
3.Don't install it accessible to water
4.Detection distance will change according to ambient temperature\'s difference. In summer,detection distance is short(it is obvious when close to human body's temperature);in winter, detection distance will be far
5.Don't install it in lower than -20 Celsius  or higher than 60 Celsius
6.Don't expose it to sun
7.Don't install it in which there are moving objects
8.The first time power on ,there will one minute initiation;during this period,the device will shine,it is normal phenomenon
9.In coast zone,thermal flow will trigger the sensor because of ocean current.If installing filament lamp which emits great heat,please keep far away from the sensor(at least 1m)
 
Weight:20g