PIR Motion Sensor-45mm To Auto Turn ON-OFF Infrared Human Body Motion Sensor Light Control220V, Imported From USA

Item specifics
Brand Name:QIACHIP,
Item Type:Switches,
Features:220V ON / OFF IR Infrared Home body IndctionSensor light Control,
Warranty:1 year,
Certification:CE,CCC,RoHS,
Remote Distance:Mention Sensor For Smart Home Light LED Lamps,
Current:10A,
Model Number:For LED lamp or Fan Safety Human Inductive Switch,
Switch Type:Remote Control,
Material:Plastic,
Switch Type:Sensor Switch,
Features:Adaptive to filament, Electricity Saving Lamp light,
Output Way:Controllable Silicon,
Load Power:Filament lamp <100W,
Rated Voltage:AC 220V 50HZ

Product Description:
Specification:
1.Sensing Mode:PIR sensing + light control
2.Rated Voltage:220V 50HZ
3.Output Way:Controllable Silicon
4.Load Power:filament lamp =100W
                       Electricity saving lamp =30W
                       LED=18W
5.Delay:20s (people are moving within the sensing range, the switch will auto delay and keep connecting;if people stay still,switch will stop responsing)
6.Sensing Distance:3-6m (high temperature will influence switch sensibility)
7.Sensing Angle:110°
8.Sensitivity to light :darkeness
 
Features:
1.Adaptive to filament, electricity saving lamp
2.This lamp is internal equipped with auto body sensor.If poeple come.the lam will power on, if people leave, the lamp will power off
3.Inner body auto sensor adopts infrared heat releasing device,and it can accurately capture moving low frequency signal and automatically power on
4.When people leave,the lamp will auto delay power off,convenient and energy saving
5.Inner side of the lap is set up with auto ambient brightness detecting circuit. Only when ambient brightness is lower than setting value,the sensor will receive sense and let the lamp power off.And it is energy saving
 
Notice:
1.When installing,please disconnect the power to guarantee safety
2.Don't apply it to overpower current or voltage
3.Don't install it accessible to water
4.Detection distance will change according to ambient temperature\'s difference. In summer,detection distance is short(it is obvious when close to human body's temperature);in winter, detection distance will be far
5.Don't install it in lower than -20 Celsius  or higher than 60 Celsius
6.Don't expose it to sun
7.Don't install it in which there are moving objects
8.The first time power on ,there will one minute initiation;during this period,the device will shine,it is normal phenomenon
9.In coast zone,thermal flow will trigger the sensor because of ocean current.If installing filament lamp which emits great heat,please keep far away from the sensor(at least 1m)
 
Packing :
1 Pcs Pack in OPP Bag,
Weight:30g
Seen On TV, Imported LED,