USB To RS232 TTL CH340G Converter Module Adapter

Description

Supports all kinds of satellites set-top box upgrade
Router, HDD, ADSL, broad band modem firmware upgrade or cracked upgrade of cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash and so on
Burn write STC MCU,NXP MCU,renesas MCU,NEC MCU and so on
Simple UART communication,commonly used UART debugging tools in supper terminal.
USB signal transferred to TTL signal,may be used by electronic enthusiasts.

Features

Adopt imported controller PL2303HX,which can stabilize the flash with high speed
500mA self recovery fuse for protection
Two data transmission indicator can monitor data transfer status in real time
Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
The entire board is coated by high quality transparent heat-shrinkable sleeve,making the PCB in insulation state from outside,
so that the board won't burnt down by material short cut.
Electrostatic package,insures the board will not be damaged before use
Support WIN7 system

**Can support XP WIN7 Android Apple systems.

**Support USB1.1 or USB2.0/USB3.0 communications.

**Simulation interface, you can upgrade external serial devices.

**Supports the common MODE of contact signal.

**Supports the SIR IRDA infrared communication.

**Provide RS232, RS485, RS422 interface.

**The program does not affect the target program to run.

PIN DETAILS:

1- 5V

2- VCC

3- 3V3

4- TXD

5- RXD

6- GND

Package Contents

1 Piece Brand New USB To RS232 TTL Auto Converter Module Converter Adapter in bubble wrap.

5 Pieces Female to Male Dupont Cables.

1 Piece Jumper Pin.

Colours may vary as per stock availability but the functionality and the specifications will be the same.

 Warranty