Wild Bull Protector ESD electrostatic dissipation Safety Shoes

Electrostatic discharge is defined as the transfer of charge between bodies at different electrical potential. Static dissipative footwear is designed to reduce the accumulation of excess static electricity by conducting body charge to ground, while maintaining a high enough level of electrical resistance. Static dissipative footwear is defined by ANSI Z41-1999 as any footwear when tested while being worn by a person and having a resistance from the person’s hand to a ground plane of one MegOhm to 1000 MegOhms.

 Cautionary note: Materials which are conductive (e.g. stainless steel surfaces) are not recommended for use as a static-safe work surface; the low electrical resistance could result in a transient-like (surge) discharge of static electricity. A rapid discharge is far more damaging to the electronic device than a gradually paced discharge through a static dissipative material.

200 j steel toe cap, Electrostatic Discharge,  oil resistant. Outer material: leather (water resistant) sole material: PU sole double density. closure type : laced up lighter in weight. toe type : protective steel toe cap 200 j. manufacturer : Qazi international warranty : 3 months against manufacturing defect. care instructions: 1. clean your shoes with leather cleaner or leather shampoo, and use a good quality brush to remove loose surface dirt. 2. if your shoes are wet after cleaning, let them air-dry before your proceed with the next step. 3. dry shoes in room temperature only and never expose them to the sun. heat from the sun will cause the leather to shrink, wrinkle, harden, dry, and crack. Surface resistivity: 1 x 105 to 1 x 1012 ohms/sq.  Volume resistivity: 1 x 104 to 1 x 1011 ohm-cm.