Wireless InfraRed IR Remote Control 8 Channel Board HOME INDUSTRIAL AUTOMATION

TV Remote Controlled 8 Channel Relay Board HOME AUTOMATION

1.Overview
IR Remote control is a combination of Infrared transmitter and Infrared receiver which contains 8 relays, which can be controlled wireless. This makes the unit very easy to operate and integrate with existing systems. The remote control operates the corresponding relay on the receiver board, i.e. Light 1 operates relay 1, Light 2 operates relay 2, etc. Relay contact can control any equipment in momentary mode (On till key pressed) or Latch Mode (Toggle on each key press). Each relay has indicator LED showing current status.

The transmitter uses a modulated 40 kHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls as it offers a high degree of noise immunity against interfering light sources. At the receiver end the IR receiver module extracts the data signal from the carrier. This active HIGH output is used to operate a relay via transistor.

Special Feature:

• Memory backup - Memory backup saves last condition of relays if power has gone.
• It can suitable 90ch IR remote, this remote also available all electronic shop.

2. Features

• Transmitter operating range up to 10 meters visible distance
• Compact 3V Battery Operated Transmitter
• Receiver Indicates output status by LED
• Receiver operates from 12V AC or DC power supply
• Relay contact are brought out as Screw Terminals 

3. Applications

• Burglar alarm system
• Smoke and fire alarm system
• Garage door controllers
• Car door controllers
• Car alarm system
• Security system
• Cordless telephones
• Other remote control systems

4. Specification

4.1. Transmitter

• Operating Voltage: 3.0V DC Battery (Battery Not Included)
• Idle Operating Current: <0.1 mA @3.0VDC
• Active Operating Current on Key Pressed: 4 mA @3.0V DC
• Infrared Carrier Frequency / Duty Cycle: +/- 2% 40 kHz / 50%
• Range of Operation: Approx. 10 Meters

4.2. Receiver

• Operating Voltage: 12.0V DC Adapter (Adapter Not Included)
• Operating Current: (All Relays Off) 15 mA @12.0VDC
• Operating Current: (All Relays On) 250.0 mA @12.0V DC
• Each Relay 12v coil , Contact NO COM NC -  7A 250V AC , 10A 120V AC ,  12A 120V DC , 10A 24V DC