Syntrino 360 degree Microwave Radar Smart Occupancy Body Motion Sensor Light Control Switch power-saving Ceiling wall Mo

Syntrino microwave motion sensor reflects the latest development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily. Its Commonly used to control lighting and extract ventilation. It saves power by ensuring lights and fans are not left on. The energy savings will be high with a short energy saving investment payback time if connected to average energy level lighting such as fluorescent tubes, or compact fluorescent lamps. Higher savings if used to control tungsten or halogen lighting. The time duration of the light will last or adjust automatically when you enter and stay in the room and the light will go out according to the time of your setting after you leave the room. Pluggable type terminals make it easier and convenient to install. Can be used with monitoring equipment, intrusion warning facility, LED lamp, fluorescent lamp, incandescent lamp, ventilator and magnetic valve etc. Can be installed on wall, ceiling or anywhere in your house. For indoor use only. SPECIFICATION: Power Sourcing: 220V/AC-240V/AC Detection Range: 360° Power Frequency: 50Hz Detection Distance: 3-10m (radius) adjustable Ambient Light: <10-2000LUX (Adjustable) HF System: 5.8GHz CW radar, ISM band Time-Delay: min.:10sec±3sec Max.:15min±3min Transmission Power: <10mW Installing Height: 1.5m~3.5m Rated Load: 1200W (incandescent lamp) 300W (energy-saving lamp) Power Consumption: 0.9W Detection Motion Speed: 0.6~1.5m/s Product size: 9.2*9.2*4cm Package size: 10*4.6*10CM