Ezcast TV Sti HDMI 1080P Miracast DLNA play WiFi Display Receiver Dongle

Specification:

♣ CPU: Actions (600MHz/1GHz)

♣ RAM : DDR-128MB

♣ Storage : NAND Flash-128MB 

♣ OS : Linux

♣ UI: Standard UI

♣ EZCast:Support Windows/OS/Android/iOS by EZCast APP(sharing local and web file to tv screen)

♣ DLNA: DMP: Display photo| audio and videos base on DLNA protocolAndroid/IOS

♣ EZMirror (Miracast):Support miracast function(certified with wifi display)

♣ Cast (play): Support ios with cast

♣ soft AP: Cell phone can cect to EZCast-AP to another WIFI router

♣ remote control:Android/Windows/IOS/ software: EZCast app

♣ Wi-Fi Module: Yes(have be built-in wi-fi module)

♣ Wi-Fi:802.11b/g/n  150Mbps 2.4Ghz

♣ Output interface: HDMI 1.3 type A male

♣ USB HOST: yes USB HSOT *1 for firmware update only

♣ power5V/500MAUSB cable USB type A to Micro USB

♣ key: U-key(update resite)

♣ LED: working LED

How to USE :-

1. Download ez cast app on device

2. Plug dongle into HDMI slot| lead into dongle and USB into service port of TV.

3. Take note of your wifi password

4. Select dongle HDMI slot using tv remote

5. Go into phone settings and select EZ cast dongle as wifi

6. Use password shown by dongle from the tv onto device and press join/enter

7. Once cected open up app

8. Once app is open it will tell you to cect to the net| press down arrow button| enter wifi password in

   and cect

9. You will be prompted to upgrade device firmware (always upgrading) select yes and upgrade (very

   important to upgrade to continue to support features)

10. Reset app and dongle will reset it self

11. On iPhone ios7 swipe up and press play

12. Select EZcast dongle and will say mirror| make sure to mirror.

13. play symbol will pop up and you can now start using the device.