Sony Xplod N1004-Amplifier (1000 Watts) + XS-NW12002-1800 Watts Subwoofer

Install the Sony Xplod N1004 and Sony - XS-NW12022E Combo in your car and experience quality audio. The combo includes the N1004 amplifier and the XS-NW12022E subwoofer, both from the SONY Xplode series. With a high-rated power handling and RMS, the subwoofer optimises sound waves of low frequency to produce clearer bass sounds. The subwoofer allows you to enjoy a fuller audio experience with increased depth.

Sony XS-NW12022E subwoofer

The Sony XS-NW12022E subwoofer, also part of the combo, has a compact design and is easy to install. The subwoofer has a diameter of 30 cm and has a rubber edge-lining which absorbs stray waves, thereby reducing interference and distortion to a minimum. It also has a ferrite magnet in the system, which functions for a long time, thereby increasing subwoofer efficiency. This makes this subwoofer one of the most sought after box-subs available in the market.

Sony Xplod N1004 amplifier

The Sony Xplod N1004 amplifier has a sleek design that will blend in with the decor of any car very easily. The design incorporates an Automatic Thermal Control system that regulates the heat and cools the amplifier down efficiently. The amplifier uses quality components and this makes sure that the amplifier is unlikely to overheat. The single-sided connection design enhances connectivity features.

Audio Support

In terms of audio support, the Sony Xplod N1004 and Sony - XS-NW12022E Combo is unmatched. The subwoofer has a 300 W rated input power. The 1800 W peak power rating redefines low frequency audio projection. Which such high a high peak power, you will be able to enjoy music at a loud volume without running the risk of irritable perception. The audio features are further enhanced by 32 Hz - 1000 Hz frequency response.

The amplifier has a four channel configuration with MOSFET Power Supply. This makes the Maximum Output Power of the amplifier 170 W x 4 (4 ohm) and the Rated Output Power 70 W x 4 (4 ohm). The High Pass Filter is rated at 80 Hz / 12 dB/oct and the Low Pass Filter is rated at 80 Hz / 18 dB/oct. The amplifier is equipped to amplify sound signals over a wide range of frequencies. It is also largely aided by the 5-50 kHz Frequency Response range. The Signal-to-Noise Ratio is rated at 100 dB. The amplifiers audio features are further enhanced by the 0.05% Total Harmonic Distortion at 1 kHz. The line-in input sensitivity is rated at 0.3 - 6 V.  The 36 A Current Drain and Load Capability of 2 ohms make it one of the most efficient amplifiers available. It also has a +0/-3 dB rated Tolerance.