NeverWet Liquid Repelling Treatment - White - 510 Grams

Rust-Oleum NeverWet is a two-step product system designed to create a moisture repelling barrier on a variety of substrates. It is suitable for use on metal, wood, aluminum, galvanized metal, PVC, concrete, masonry, asphalt, vinyl siding, fiberglass, canvas, most plastics and more. NeverWet dries to a flat, frosted appearance which may change the color and sheen of the treated object. Test in an inconspicuous area before applying to entire project. NeverWet is not recommended for use on clothing or electronics.

Features of the product:-

Not intended to be applied to electronic devices or clothing.
Dries to a flat finish.
Durable formulation, ideal for indoor/outdoor conditions.
Dries fast — 30 minutes to touch.

Packing size: 510 Grams (Base Coat + Top Coat)

Featured Video

Tips for Application

Painting Conditions: Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50ºF (10ºC) and 90ºF (32ºC) and humidity is below 85% to ensure proper drying. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Surface Preparation: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces to create a surface profile.

Base Coat Application: A test pattern on cardboard is recommended to obtain a feel for the spray pattern. Hold can upright 6-12” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Continue to shake the can between passes. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more base coats a few minutes apart. Allow to dry for at least 30 minutes before applying the topcoat. Do not use near open flame.

Top Coat Application: A test pattern on cardboard is recommended to obtain a feel for the spray pattern. Hold can upright 6- 12” from surface and spray in one steady pass. Avoid soaking the surface. Stop and wait for each pass to dry for 1-2 minutes. Three or four coats will give optimum results. Do not apply any other topcoat other than NeverWet as it will lose its moisture repellent properties.